Midea Dehumidifier

Which Midea dehumidifier counts as the best home dehumidifier comes down to one thing you can check from the doorway: where the water goes. With a floor drain or a laundry sink below the unit, the 35-pint Midea Cube covers a damp room and drains itself. With nothing below the unit to drain into, buy the 50-pint Cube with the built-in pump, because nothing smaller in the line lifts water to a sink or a window.

Midea Dehumidifier Cube

The Cube is the line to sort through, and its body is what gives it the name. The answer to are midea cube dehumidifiers any good starts with that body. The tank lifts and twists off the base, nests down for storage, and extends to hold more water before you have to empty it. Every model also brings wheels, app control, and a hose option for continuous draining.

Four setups cover what most homes look like:

The hose in the box drains by gravity, so it works only when the whole run slopes downhill to a point lower than the unit's outlet. That gravity drop is the setup the best dehumidifier for basement with drain hose needs. Keep it flat and short, because a kink stops the flow.

Your basement or garage drops below 41F

A compressor dehumidifier is specified to run between 41F and 95F. Below 41F the coils frost and the unit stops pulling water, which is why Midea's instruction is to stop using the Cube in a room that cold. Keep the drain hose out of that cold as well: water freezes in a run at or below 32F and blocks the line. Below about 50F, a desiccant unit is the stronger choice.

Nothing in this line is quiet, which matters if the unit ends up near a bed. Measured dehumidifiers run roughly 50 to 70 dB, and the bedroom guideline of under 30 dB(A) sits well below the quietest of them, which is the gap you run into when you shop for the best dehumidifier for small bedroom.

Midea is a good brand of dehumidifier for the least glamorous reason, which is the short answer to is midea a good brand for dehumidifiers: it makes the machines rather than licensing its name onto someone else's. The same factory builds dehumidifiers sold under a long list of other names, which is why one recall in 2016 touched roughly fifty brands.

That recall, which is what are midea dehumidifiers being recalled asks about, matters only if you already own an old Midea unit. It covered about 3.4 million machines made between January 2003 and December 2013, the hazard was overheating and fire, and the remedy was a refund or a replacement. Nothing on sale now falls in that window, so the nameplate on yours is the check.

Midea Dehumidifier 50 Pint

Buy the 50-pint Cube when the water is visible, or when the space runs over 2,000 sq ft and the damp is heavy. Under that, a Midea dehumidifier 35 pint covers the very damp end of the smaller band.

ENERGY STAR sizes in two bands rather than by the square foot. Under 2,000 sq ft, that means 20 to 30 pints for a slightly to moderately damp space, 25 to 40 when it's very damp, and 30 to 50 when it's wet. Over 2,000 sq ft, the same three conditions call for 30, 40 and 50 pints. It's a coarse table, coarse enough that a small bedroom and a 1,000 sq ft basement land in the same band.

Source says

ENERGY STAR states plainly that it is better to oversize than to undersize, with no caveat

energystar.gov/products/dehumidifiers · retrieved 2026-10-03

If a 35 and a 50 both look plausible for the same wet space, take the 50.

The number on the box also means something different than it did a decade ago. Portable units are rated at 65F and 60% relative humidity now, where cool air gives up less water than it did at the old test's 80F.

What a pint rating is measured at
Test conditionAir temperatureRelative humidity
Portable units before 2019 (ANSI/AHAM DH-1-2008, adopted by DOE in 2006)80F60%
Portable units now (10 CFR 430 Appendix X1)65F60%

The same machine carries a lower number under the current condition.

ENERGY STAR puts the size of that gap at roughly a third: a unit sold as 60 pints before 2019 tests near 35 today. DOE moved the test to 65F so the figure reflects a basement rather than a lab, which is why a 50-pint unit is not the small machine the number once described.

Midea Dehumidifier With Pump

One Cube carries a pump, and it is the 50-pint. The lifts water up to 14 ft, which is what lets the unit sit where the damp is while the water goes to a sink or a window above it.

Lift is rated per model, so check it against your own run before you buy, which is where what do i need to know before buying a dehumidifier starts. If the sink or window sits more than 14 ft above the unit, take the Honeywell 50-pint with the built-in pump, rated to 16.4 ft.

The pump only comes on the biggest Cube, so a small room ends up with capacity it doesn't need, which is the direction the sizing table points in anyway.

Midea Dehumidifier App

The Midea dehumidifier wifi control is the SmartHome app, and every Cube in the line has it, along with voice-assistant control. Because it comes on the 20, 35 and 50-pint models alike, the app never decides which one you buy; the size and the drain do.

Midea Dehumidifier How To Use

Running a Cube comes down to three moves: set the target, settle the drain, then leave the rest to the unit. The Midea dehumidifier manual for the 20, 35 and 50-pint models is the one to keep, because it carries the operating range and the drain setup in one place.

Source says

EPA: keep indoor RH below 60%, ideally between 30% and 50%

epa.gov/mold/mold-course-chapter-2 · retrieved 2026-10-03

Set the Cube at 50%. That single number keeps you inside the range and clear of the line.

The does the switching from there, cutting the compressor out once the room hits your number.

For the drain, pick one route. With a floor drain or a sink below the unit, run the hose downhill, keep it flat, and check it for kinks. With nothing below the unit, use the bucket and empty it when the unit shuts off.

The problems these units turn up with start at the drain. Dust in the condensate becomes sludge and algae that plug the hose. A blocked hose behaves like a full bucket, and the unit shuts off on its float. If the pump light blinks, clean the pump filter and check the line for a blockage.

Questions

Is Midea a good brand of dehumidifier?

Midea is a good brand of dehumidifier because it makes the machines itself rather than licensing its name to another manufacturer. The same factory builds dehumidifiers sold under a long list of other names, which is why one recall in 2016 touched roughly fifty brands. That recall matters only if you already own an old Midea unit, and it does not apply to anything on sale now.

What should my Midea dehumidifier be set at?

Set the Cube at 50 percent. That single number keeps you inside the range and clear of the line. The humidistat then does the switching from there, cutting the compressor out once the room hits your number. The same setting applies across the 20, 35, and 50-pint models.

What are the common problems with Midea dehumidifiers?

The problems these units turn up with start at the drain. Dust in the condensate becomes sludge and algae that plug the hose, and a blocked hose behaves like a full bucket, so the unit shuts off on its float. If the pump light blinks, clean the pump filter and check the line for a blockage. Cold rooms also stop the unit, since a compressor dehumidifier is specified to run between 41F and 95F, and below 41F the coils frost and it stops pulling water.

Are Midea dehumidifiers being recalled?

A recall did cover some Midea dehumidifiers, but it applies only to units made between January 2003 and December 2013. That 2016 recall covered about 3.4 million machines, with overheating and fire as the hazard, and the remedy was a refund or a replacement. Nothing on sale now falls in that window, so the nameplate on your unit is the check.